everthrivehvac-15-page

What to Expect During a Professional HVAC Inspection

Fri, 21 Aug 2026 20:59:07 GMT

If you've never had a professional HVAC inspection, it can be helpful to know what actually happens during a visit. Here's a look at what a typical inspection covers.

Checking the Thermostat and Controls

A technician will usually start by verifying your thermostat is functioning correctly and communicating properly with your system.

Inspecting the Air Filter

Filters are checked for dirt and buildup, since a clogged filter reduces efficiency and strains the system.

Examining Electrical Connections

Loose or worn electrical connections can cause performance issues or safety hazards, so these are checked and tightened as needed.

Testing Refrigerant Levels

For AC systems, refrigerant levels are measured to make sure they match manufacturer specifications. Levels that are too low can signal a leak.

Inspecting Ductwork

Technicians look for leaks, disconnected sections, or blockages in ductwork that could be reducing airflow and efficiency throughout your home.

Cleaning Key Components

Coils, drains, and other components accumulate dirt and debris over time. Cleaning these parts helps your system run more efficiently.

Testing Overall System Performance

Finally, the system is run through a full cycle to confirm it's heating or cooling properly and operating within normal parameters.

Why Regular Inspections Matter

Routine inspections catch small issues before they become expensive repairs, extend the life of your system, and keep it running efficiently year-round.

Ready to schedule your next HVAC inspection ? Contact us today to book an appointment.

Thermostat Settings That Can Lower Your Energy Bill

Fri, 21 Aug 2026 20:57:15 GMT

Your thermostat is one of the easiest tools for controlling both comfort and cost. A few simple adjustments can add up to real savings over the course of a year.

Set It and (Mostly) Forget It

Constantly adjusting the temperature manually often wastes more energy than it saves. Programmable and smart thermostats let you set a consistent schedule that adjusts automatically throughout the day.

Follow the 68/78 Rule

A common guideline is to set your thermostat around 68°F in winter and 78°F in summer while you're home, adjusting a few degrees when you're away or asleep.

Use Setback Temperatures Wisely

Lowering (or raising) the temperature by 7-10 degrees for 8 hours a day, such as during work hours, can lead to noticeable savings without sacrificing comfort when you're actually home.

Avoid Drastic Adjustments

Cranking the thermostat way up or down doesn't cool or heat your home any faster — it just uses more energy and can strain your system unnecessarily.

Consider a Smart Thermostat

Smart thermostats learn your habits over time and can adjust automatically, often paying for themselves through energy savings within a year or two.

Small Changes, Real Savings

Thermostat habits are one of the simplest ways to lower your energy bill without any major investment.

Curious if a smart thermostat is right for your home? Get in touch and we'll help you find the best option.

How to Choose the Right Size Air Conditioner for Your Home

Fri, 21 Aug 2026 20:55:54 GMT

Bigger isn't always better when it comes to air conditioning. An improperly sized unit can leave you uncomfortable and cost you more in the long run. Here's what to know before you buy.

Why Size Matters

An AC unit that's too small will run constantly, struggling to cool your home and wearing down faster. One that's too large will cool the air quickly but shut off before removing enough humidity, leaving your home feeling clammy and uneven.

What Determines the Right Size

A few key factors go into sizing an AC unit correctly:

Square footage of the space being cooled
Ceiling height and overall room volume
Insulation quality throughout the home
Number and size of windows, since sunlight adds heat load
Local climate, since hotter regions require more cooling capacity

The Role of a Manual J Calculation

Professionals use a standardized formula called a Manual J load calculation to determine the precise cooling capacity a home needs. This considers all the variables above rather than relying on rough square-footage estimates alone.

Don't Guess. Get an Assessment.

Because so many variables affect sizing, it's best to have a professional evaluate your home rather than relying on general size charts.

The Payoff of Getting It Right

A properly sized system cools more efficiently, runs quieter, lasts longer, and keeps humidity in check, all while costing less to operate.

Not sure what size system your home needs? Reach out and we'll help you find the right fit.